English manual AJAX alarm system

Short manual

AJAX's best-selling motion detector is ideal for detecting motion in a room. The detector is equipped with different filters so that it does not cause false alarms. The detector can be set in 3 different sensitivities, where your choice depends on your environment.

If you have pets such as dogs or cats walking around, you choose the least sensitive setting. You can also choose this mode if you want to activate the alarm when using an air conditioner or fireplace. Air currents of a different temperature can have a negative effect on the reliability of this detector. If you do not use different air currents or open windows during surveillance, you can choose the normal or very sensitive position in which every movement will be detected.

Main functions

• Detection of movement
• 1700 meters wireless range
• Battery life up to 4 years

Installing

On the back of the MotionProtect there is a mounting plate.

• Remove the mounting plate by sliding it.
• Open the AJAX application and choose Add device
• Scan the QR code with a phone via the AJAX application
• Set the switch of the detector to "on" within 30 seconds, on the front side of the detector a green LED will light up.
• The MotionProtect will become visible in the application, and after that several functions can be programmed.
• Tip: Ideal detection mounting height is 2.40 meters.

Of course you can always contact us if we can help you with anything.

Short manual

The MotionProtect Plus is similar to the MotionProtect, but now with built-in radar detection. This makes it suitable for use in case of strong temperature fluctuations in the home, such as air conditioning / fireplace, or open doors / windows.

This is also a widely sold Ajax motion detector, ideal for detecting motion in a room. The detector is equipped with different filters so that it does not cause false alarms. The detector can be set in 3 different sensitivities, where your choice depends on your environment.

Main functions

Detection of movement in locations with strong temperature fluctuations

1700 meters wireless range

Battery life up to 4 years

Installing

On the back of the MotionProtect Plus there is a mounting plate.

• Remove the mounting plate by sliding it.
• Open the AJAX application and choose Add device
• Scan the QR code with a phone via the AJAX application
• Set the switch of the detector to "on" within 30 seconds, on the front side of the detector a green LED will light up.
• The MotionProtect Plus will become visible in the application, and after that several functions can be programmed.
• Tip: Ideal detection mounting height is 2.40 meters.

Of course you can always contact us if we can help you with anything.

Short manual

The CombiProtect is a MotionProtect and GlassProtect in one. The CombiProtect can both detect movement and detect the sound of glass ringing. The detector is equipped with various filters so that it does not cause false alarms. The detector can be set in 3 different sensitivities, where your choice depends on your environment. As far as pets and air currents are concerned, the possibilities are the same as the MotionProtect. This detector is therefore mainly used in areas where there are many windows, and where detection from the outside of the windows is not desirable.

Main functions

• Detecting movement and glass rattle
• 1700 meters wireless range
• Battery life up to 4 years

Installing

On the back of the CombiProtect there is a mounting plate.

• Remove the mounting plate by sliding it.
• Open the AJAX application and choose Add device
• Scan the QR code with a phone via the AJAX application
• Set the switch of the detector to "on" within 30 seconds, on the front side of the detector a green LED will light up.
• The CombiProtect will become visible in the application, and after that several functions can be programmed.
• Tip: Ideal detection mounting height is 2.40 meters.

Of course you can always contact us if we can help you with anything.

Short manual

AJAX DoorProtect registers the opening and closing of windows and doors. A DoorProtect can also be used to use the alarm system at night. By placing a contact on each window and each door to the outside, you can still walk freely through the house in the evening or at night. As soon as someone opens the door, for example when you are asleep, an alarm will sound. You can create a total of 9 (or 25 hub+) groups in the Hub which you switch on and off separately. This way you can easily switch on only the outside detectors or the door detectors, so you have all the freedom in the house to be able to move around.

Main functions

• Detects open or closed status of a door or window
• 1200 meters wireless range
• Battery life up to 5 years

Installing

On the back of the DoorProtect there is a mounting plate.

• Remove the mounting plate by sliding it.
• Open the AJAX application and choose Add device
• Scan the QR code with a phone via the AJAX application
• Set the switch of the detector to "on" within 30 seconds, on the front side of the detector a green LED will light up.
• The DoorProtect will become visible in the application, and after that several functions can be programmed.

If the DoorProtect is to be installed at an entrance door / front door, a delay in departure and coming in is desirable to set if you are using a KeyPad to switch the system on or off.

The maximum distance between the DoorProtect and the magnet is 2 centimeters.

Of course you can always contact us if we can help you with anything.

Short manual

The AJAX DoorProtect Plus detects the opening and closing of windows and doors, as well as vibrations and tilting. A DoorProtect Plus can also be used to use the alarm system at night. By placing a contact on each window and each door to the outside, you can still walk freely through the house in the evening or at night. As soon as someone opens the door, for example when you are asleep, an alarm will sound. You can create a total of 9 (or 25 hub+) groups in the Hub which you switch on and off separately. This way you can easily switch on only the outside detectors or the door detectors, so you have all the freedom in the house to be able to move around.

Main functions

• Detects open or closed status of a door or window
• Detects vibrations and tilt
• 1200 meters wireless range
• Battery life up to 5 years
  
  

Installing

On the back of the DoorProtect Plus there is a mounting plate.

• Remove the mounting plate by sliding it.
• Open the AJAX application and choose Add device
• Scan the QR code with a phone via the AJAX application
• Set the switch of the detector to "on" within 30 seconds, on the front side of the detector a green LED will light up.
• The DoorProtect Plus will become visible in the application, and after that several functions can be programmed.

If the DoorProtect Plus is to be installed near an entrance door / front door, a delay in departure and coming in is desirable in order to set if you use a KeyPad to switch the system on or off.

The maximum distance between the DoorProtect and the magnet is 2 centimeters.

Of course you can always contact us if we can help you with anything.

Short manual

A glass breakage detector is an ideal detector to detect a burglary at an early stage which takes place by breaking a window, breaking glass. This is still a commonly used method of entering a home. This detector is preferably used in situations where no detection possibility can be mounted on the outside of the glassware, because for example people can be present there during absence, for example a postman's visit.

Main functions

• Detects glass breakage up to a distance of 9 metres
• 1000 meters wireless range
• Battery life up to 5 years

Installing

On the back of the GlassProtect there is a mounting plate.

• Remove the mounting plate by sliding it.
• Open the AJAX application and choose Add device
• Scan the QR code with a phone via the AJAX application
• Set the switch of the detector to "on" within 30 seconds, on the front side of the detector a green LED will light up.
• The GlassProtect will become visible in the application, and after that several functions can be programmed.

It is best to leave the sensitivity to "normal", unless the distance from the window is more than 5 meters, then the sensitivity to "high" can be set. Of course it is the intention to place this detector only on windows that are connected to the outside.

Of course you can always contact us if we can help you with anything.

Short manual

A burglar often spends some time entering a house. Forcing a lock or figuring out which window is the best for you is always done in your garden or driveway. This is a precious time that a normal alarm system without outside detection will not do anything with, but thanks to the AJAX MotionProtect Outdoor you can bother the burglar with it. Thanks to this detector, the alarm will go off even before the burglar sees a chance to cause damage to the house. A burglary can therefore be prevented at a very early stage.

Main functions

• Detects movement outdoors up to a distance of 15 meters 
• 1700 meters wireless range
• Battery life up to 5 years

Installing

On the back of the MotionProtect Outdoor there is a mounting plate.

• Remove the mounting plate by sliding it.
• Open the AJAX application and choose Add device
• Scan the QR code on the back of the MotionProtect Outdoor with a phone via the AJAX application.
• Set the switch of the detector to "on" within 30 seconds, on the front side of the detector a green LED will light up.
• The MotionProtect Outdoor will become visible in the application, and after this various functions can be programmed
• Mount the detector at a height between 80 and 130 centimetres from the ground.
• Select the distance at which the detector should operate using the rear switch, which can be set between 3 and 15 meters.

If the detector is placed in the front yard, a delay in arrival and departure is desired.

Always make sure that there are no obstacles in front of the detector, such as a plant.

Of course you can always contact us if we can help you with anything.

Short manual

A smoke detector is an addition to an alarm system that many people often forget or skip for cost savings. But it can save your life in case of fire, so don't save on it. Preferably place a smoke detector in every room, but certainly on overflow, and the way you walk from your bedroom to the outside, as an escape option when the time comes.

Main functions

• Detects smoke from a fire
• 1300 meters wireless range
• Battery life up to 4 years
• Can also be used as an extra siren in case of a burglary, next to an indoor siren. This significantly increases the volume of the alarm signal in the house.

Installing

At the back of the smoke detector there is a mounting plate.

• Remove the mounting plate by turning it
• Open the AJAX application on your phone and choose to add device
• Scan the QR code on the back of the FireProtect
• Press the switch on button within 30 seconds, on the front side of the detector a red LED will light up.
• The FireProtect will be visible in the application

The smoke detector is always on, and no further settings need to be made.

Mount the detector in the middle of a ceiling at its highest point.

Smoke always rises and will be detected more quickly.

Of course you can always contact us if we can help you with anything.

Short manual

A smoke detector is an addition to an alarm system that many people often forget or skip for cost savings. But it can save your life in case of fire, so don't save on it. Preferably place a smoke detector in every room, but certainly on overflow, and the way you walk from your bedroom to the outside, as an escape option when the time comes.

The Plus version of this smoke detector, just like the standard smoke detector (FireProtect), offers protection against smoke, with the additional detection of carbon monoxide. Carbon monoxide is a highly toxic and odourless gas that is produced by incomplete combustion of a fuel in, for example, a central heating boiler, geyser, gas stove, wood, gas and oil heater or fireplace. A major misunderstanding is that carbon monoxide is only released with outdated equipment. This is not the case, even with new equipment, carbon monoxide can be released due to a technical defect or incorrect connection.

Main functions

• Detects smoke, carbon monoxide and rapid temperature changes
• 1300 meters wireless range
• Battery life up to 4 years
• Can also be used as an extra siren in case of a burglary, next to an indoor siren. This significantly increases the volume of the alarm signal in the house.

Installing

At the back of the smoke detector there is a mounting plate.

• Remove the mounting plate by turning it
• Open the AJAX application on your phone and choose to add device
• Scan the QR code on the back of the FireProtect Plus
• Press the switch on button within 30 seconds, on the front side of the detector a red LED will light up.
• The FireProtect will be visible in the application

The smoke detector is always on, and no further settings need to be made.

Mount the detector in the middle of a ceiling at its highest point.

Smoke always rises and will be detected more quickly.

Of course you can always contact us if we can help you with anything.

Short manual

A water detector can be used to detect leakage or flooding. Early detection helps to prevent damage to a floor or the whole house. You can place this detector anywhere where leakage can occur, such as under a dishwasher or washing machine.

Main functions

• Detects water
• 1300 meters wireless range
• Battery life up to 5 years

Installing

• Open the AJAX application on your phone and choose to add device
• Scan the QR code on the back of the LeaksProtect
• Press the switch on button within 30 seconds, on the front side of the detector a green LED will light up.
• The LeaksProtect will be visible in the application
• De waterdetector is altijd aan, en hier hoeft verder niets aan instellingen op aangepast te worden.

Of course you can always contact us if we can help you with anything.

Short manual

A remote control for your keychain to easily switch the alarm on and off. This remote control can also be used to press the panic button (exclamation point symbol), to instruct the siren to sound, and to notify all connected users of a request for help via the AJAX application.

Main functions

• Turns the alarm on and off
• 1300 meters wireless range
• Battery life up to 5 years

Installing

• Open the AJAX application on your phone and choose to add device
• Scan the QR code on the SpaceControl package
• Simultaneously press and hold the button with the circle and exclamation mark. The LED will light up and the remote control has been added.

The remote control is a good alternative to using your smartphone. You don't have to take your phone out of your trousers or bag to turn the system on or off. If you hang the remote control on your keychain, you will never forget to take it with you when you leave home.

Of course you can always contact us if we can help you with anything.

Short manual

The KeyPad is ideal for activating and deactivating the alarm system at a fixed position. When you leave, you no longer have to look for your phone or remote control. You can activate the alarm directly with one push on the KeyPad.

Main functions

• Turns the alarm on and off at a fixed location
• 1700 meters wireless range
• Battery life up to 2 years

Installing

• Open the AJAX application on your phone and choose to add device
• Scan the QR code on the back of the KeyPad
• Within 30 seconds, press the "on" button on the back side.
• Set the volume and a password for the KeyPad via the AJAX application.
• Optional: Select the "Enable without" function by using a password to enable the alarm system even more easily.

The KeyPad uses "aaa" mini penlite batteries. Keep this in mind, as they differ from the standard battery that you will find in almost all other products.

Of course you can always contact us if we can help you with anything.

Short manual

An indoor siren is perfect for showing, but above all also letting the environment know that there is an alarm in your home or residence. At night, for example, if you are asleep, you can use this siren to emit modest beeps at a volume to be determined to let you know that something is being detected. That's just a little more pleasant when you wake up. Of course it is also possible to use the full volume, but we do not recommend this for the night when you are at home yourself. Thanks to its day and night mode, the alarm system can be set up in such a way that you decide for yourself how the internal siren alerts you to a burglary.

Main functions

• Deterrence of burglars
• Transmission of intrusion message
• 1700 meters wireless range
• Battery life up to 2 years

Installing

• Open the AJAX application on your phone and choose to add device
• Scan the QR code on the back of the home sirens
• Within 30 seconds, press the "on" button on the back side.
• Set in the application how long and how hard the indoor siren has to do its work.
• Mount the siren in the desired location in the house

Of course you can always contact us if we can help you with anything.

Short manual

An outdoor siren is perfect for showing, but above all for letting the environment know that there is an alarm in your home or residence. If you use the unique outdoor motion detectors, the burglar will soon become acquainted with the siren hanging outside on the facade. If you do not use outdoor detection, the siren will sound a loud alarm as soon as one of the other detectors inside the house is activated. The street siren has a red LED edge which flashes when it is activated, making it easier to see where the sound of the siren is coming from, especially in the dark, and giving extra attention to people in the neighbourhood.

Main functions

• Deterrence of burglars
• Transmission of intrusion message
• 1700 meters wireless range
• Battery life up to 2 years

Installing

• Open the AJAX application on your phone and choose to add device
• Scan the QR code on the back of the Streetsiren
• Within 30 seconds, press the "on" button on the back side.
• Set in the application how long and how hard the outdoor siren has to do its work.
• Mount the siren in the desired location outside the house

Of course you can always contact us if we can help you with anything.

Short manual

Switching devices on and off remotely is possible with this Socket. From now on you can remotely control your devices / lighting all over the world. In addition, you can also monitor the power consumption and see the actual consumption. The edge of the Socket gives light, and changes color as you use more power.

Main functions

• Remote switching of devices
• Monitor power consumption
• 1000 meters wireless range

Installing

• Open the AJAX application on your phone and choose to add device
• Scan the QR code on the side of the Socket
• Plug the Socket into a power outlet and it will light up green.

Of course you can always contact us if we can help you with anything.

Short manual

The control of existing switches is possible with this WallSwitch / flush-mounted switch. Preferably turn on an installer for the installation of the switch, as it works with 230 volts. The WallSwitch is mounted behind the switch in the wall, and is therefore not visible from the outside.

Main functions

• Remote switching of devices
• Monitor power consumption
• 1000 meters wireless range from the Hub

Installing

• Open the AJAX application on your phone and choose to add device
• Scan the QR code on the back of the WallSwitch
• Mount the Switch behind the switch
• Set via the application whether the switch should switch on or off when the alarm is activated or deactivated
• Never forget to turn off a device when you leave. From now on, you can automatically switch off any device when the alarm is activated.

Of course you can always contact us if we can help you with anything.